Wednesday, 30 November 2011


Is this on your Christmas wishlist?
Well here's your chance to win a Go! baby fabric cutter and 3 dies of your choice.
Take my word for it, it'll be difficult to pick just 3 :)
I deliberated long and hard before I picked my dies,
but am so happy with them.
Next one on my wish list has to be the Sarah Vedeler Go! Star Points.
I used the circles die and the rick rack die to make my 'Flying High' quilt.
Another bonus from Accuquilt is this free set of patterns and blocks, which you
receive when you sign up to receive their newsletter by email.
To enter the giveaway:
1. Go to and tell me which 3 dies you would pick if you won!
2.'Like' Accuquilt on facebook, (*you do not need to leave a comment
on their facebook page) -come back here and tell me!
3. 'Like' Lisnaweary Quilts on facebook and come back and tell me.
4. Become a follower of this blog or tell me if you already are.
5. Blog or facebook about this giveaway, and come back and tell me.
Giveaway closes 11th December 2011 at midnight GMT.
Best of luck everyone!

This is a sponsored giveaway

Wednesday, 23 November 2011

'Flying High' - tutorial

After playing about with the Accuquilt Go! baby this is what I've made.
'Flying High' - finished size 44" x 55".
I've never been in a hot air balloon, and I'm really not great with heights!
After making this mug rug, I wanted to make something else using a hot air balloon theme.
The Go! Circle die was super quick and the Rick Rack die made it very easy to cut the border.

Here's the tutorial:
1. Cut out white background fabric 28" x 39".
2. Pick various fabric scraps to cut out balloons. I had some fabrics left over from another project, some of it was cut into narrow strips. I was able to use these to make some of the balloons.
I stitched strips together ( they need to be at least 6 1/2" long - this is the width of the die), pressed the seams open and pressed a piece of bondaweb on the back.
3. Place the piece of fabric on top of the circle die, and place a cutting mat on top.
4. Roll the die through the cutter. (my 9 year old daughter loved doing this!)
5. Voila - perfect circles - or balloons! Cut out 6 small, 6 medium and 6 large circles using various colours of fabrics.
6. For the baskets, cut out 6 1" squares, 6 1 1/2" squares and 6 2 1/2" squares.
7. Place the balloons and baskets on the background fabric. Place the smallest ones at the top, medium ones in the middle and larger ones at the bottom. Press in place.
8. Using a water soluble marker and a ruler draw on the ropes between the basket and the balloon.
9. Using black thread sew around the balloons, down the ropes and around the basket.
I sewed several lines on the ropes to make them look a little thicker.
10. To make border, cut out 6 8 1/2" x width of fabric strips. Attach borders making sure to mitre corners.
11. To make the rick rack border, sew strips of fabric together as in step 2. This time you need to make a long piece of sewn strips. Two pieces measuring 54" x 6 1/2" and two pieces measuring 65" x 6 1/2".
12. Press the seams open.
12. Press bondaweb on the back of the strips.
13. Using a permanent pen, mark the edges of the die on the foam - this just makes it easier to see the end when you're placing the fabric on top. (The Rick Rack die is open ended, which allows you to fold long strips of fabric and the die will cut in a continuous piece.)
14.Place the strip of fabric on the die, folding over the fabric where the die is marked.
15. Place the cutting mat on top and roll through the baby!
16. Perfect rick rack!
17. Place the rick rack border on the quilt top with ends overlapping, matching the edge of the rick rack with the edge of the quilt top.
18. Using a ruler and water soluble pen, draw a line on the rick rack in line with the mitred corner and where the rick rack overlaps.
19. Fold back the top rick rack and repeat on the other rick rack.
20. Cut along each of the drawn lines one at a time.
21. These should meet perfectly. Pin the rick rack in place and repeat for all four corners.
22. Press the rick rack in place.
23. Start at the mitred corners and applique the rick rack in place.
24. Applique both sides of the rick rack in place.
25. Layer backing, wadding and quilt top - quilt as desired. I free machine quilted some loopy circles. I used Wonderfil Silco white thread for the background and black thread for the border.
26. Buy or make 1 1/2" single fold continuous bias binding. (There's a great tutorial here)
It really is necessary to use bias binding to get around all those curves.
Sew on the binding.
27. Trim back the excess fabric and wadding following the edge of the rick rack.
28. Carefully snip the curves.
29. Carefully fold the binding over, pin and sew in place.
There you have it - Flying High made with the help of the Accuquilt Go! baby!
Here's the back I pieced together:
I just have to make my quilt label now for the back and it will be complete.
As always I'd love to see your photos if you make 'Flying High', flickr group is here.

Wednesday, 16 November 2011

Nobody puts baby in a corner..

Ok, it's a line from one of my all time favourite films :)
But it has been true this past couple of weeks!
I've been working hard on a tutorial using my new GO! baby - promise!
I had made this 'hot air balloon' mug rug for the 2011 Goodie Swap
and felt inspired to make some more:)
If all goes to plan I'll be able to post the tutorial next week.
Maybe I'll put on the 'Dirty Dancing' DVD and sing along as I quilt ;)
What's your all time favourite film?

Wednesday, 2 November 2011

New arrival

I just have a couple of photos to share with you today.
This past weekend has been hectic in our house -
School half term and general Halloween madness is not conducive to sewing!
I got an old chair reupholstered this week, it really was in a sorry state
and I wish I had taken a 'before' photo of it.
This is the 'after' photo:
I had picked some tartan fabric in terracotta and green and am so delighted with the way it turned out. I had considered attempting to do it myself, but am so glad I didn't even try!
I did make the little Scottie dog to go with it using the pattern found here, I gave him a little leather collar and named him Hamish!
Yesterday saw the arrival of another new addition to our house:
oh yes! a GO! baby!
Things may be quiet here for a while - I've got a new baby to look after;)